
So, I'll begin with my cross country flight from Allentown to Georgetown/Sussex County, Delaware. I completed this flight utilizing a Cessna 172RG. The "RG", as you may know from my earlier posts, stands for retractable gear, a feature no longer available on the model 172s. Despite its age (manufactured in 1980), the aircraft, N5176V, is still reliable and it gives me the ability to gain time in a "complex" aircraft, that is, an aircraft with a constant speed propeller which allows for a faster cruise speed.
Anyway, the route of flight was essentially directly south, taking me over Pottstown, then to the west of Philadelphia over Wilmington where I crossed the Delaware River to the Delaware side. Afterwards, I overflew Dover Air Force Base and began my descent into my destination. The air traffic at this small, uncontrolled airport was surprisingly dense that day. This type of situation is one which calls for traffic spotting and separation skills, which are obviously VERY important. Some believe that it is better to learn in a controlled environment, but I hold strong to the necessity to learn basic and necessary skills like this. In the long run, it really pays off. I ended up making a safe landing, although not my smoothest, possibly due to the strong crosswind.
I've actually wanted to explain crosswind landings for a while, and so I'll take the opportunity to do so now. In an ideal situation, a takeoffs and landings are made into the wind. Why? A headwind shortens the takeoff and landing rolls which has many advantages. For example, in the event of a rejected takeoff, you would want to have as much runway remaining as possible in order to bring the aircraft to a stop safely. Similarly, a pilot strives to use as little runway as possible during a landing, while having the rest to use in the event of an emergency or another anomaly. Anyway, in most cases, the wind doesn't point directly down the centerline of the runway. Often, it crosses the runway at an angle, which gives a crosswind. Some unique techniques must be applied to manuever correctly in a crosswind environment, which mainly consists of one of the following (see here for more):

The de-crab/sideslip. These are actually two different, yet very similary crosswind techniques. Both involve the use of aileron (bank or roll) and rudder (yaw or horizontal movement) to correct for the wind correction angle. So, instead of landing at an angle, the pilot will apply downwind rudder and opposite aileron inputs. For example, if the wind were coming from the left, I would apply right rudder and left aileron to keep the nose aligned with the centerline of the runway. The only difference between these two techniques is when to apply these control movements. In the sideslip, the entire approach would be flown with these special control inputs. In the de-crab situation, these controls are inputed in literally the final moments of the approach, only seconds before touchdown. Here's a video of a Singapore Airlines Boeing 747-400 landing at Zurich, Switzlerland, using the de-crab technique.
So, I took off from Georgetown only a few minutes after landing, and I was on my way home once again. Just like the flight to Sussex County, I passed Dover AFB, some ships in Delaware Bay, and west of Philly once again before descending into Allentown. Unfortunately, I made another rough landing at Queen City Airport. I hope I don't keep this up!
On my next flight, I was off to Danbury, Connecticut with my mother. I hadn't been to Danbury for a while, but I sure did remember the interesting terrain surrounding the airport. The first time I flew into the airport, I was surprised by the high hills which essentially surround the entire field. This made for an interesting arrival, especially since it was at night. As a result, the approach was a bit higher and longer. As a precaution, there are several lighted towers along the top of the hills to warn pilots of the high terrain. You can get an idea of what I am explaining in this photo.

As I flew over eastern Pennsylvania on the way home, I also admired the snowy landscape of the region where I live.
I saved the best news for last, and that is that the flight school I attend finally attained a new airplane! Not only is it a new airplane, but it also has the very advanced Garmin G1000 avionics! In addition, it has been outfitted with leather seats for even greater comfort. Needless to say, I think this is going to be my new favorite plane :-) Just look how it shines! However, in order to fly the aircraft on my own, I need to complete a checkout with an instructor which simply consists of three hours of flying time with the CFI. The aircraft is the same, but the systems are very different and advanced, so I must take some time to familiarize myself. I was able to fly it for roughly an hour and a half one weekend, and as my instructor put it, the machine flies like a cadillac.
Although it's a 2005 model, the plane still flies like it were brand new and the features included in the avionics give a plethora of information that previously was not available to me. For example, I can now receive XM weather (with about a 20 minute delay) and traffic information. However, these features aren't top of the line. For instance, since a 20 minute update delay exists for the weather information, it should be used for general awareness of any weather phenomena, not last minute deviation. The same goes for the TIS, or Traffic Information Service. This feature is a few steps below Traffic Collision and Avoidance System (TCAS) which is a more advanced system common on most airliners. It will display aircraft in the nearby vicinity, but it is still up to the pilot to spot the traffic and avoid it visually, not depend on the computer. Nevertheless, despite the limitations, this additional information and capabilities make flying all the more safer.
Tomorrow, February 1, I will be going flying in the new plane again to finish my checkout, and hopefully I will be able to capture some photos in-flight to give a more in-depth look at the systems.
Make sure to check my flickr site often, as I will often upload new photos long before I make a new post on this blog. Also, I am always looking for new readers, so if you know someone that may be interested in my sites, make sure to refer the links to them! Furthermore, if you'd like a more detailed explanation of a concept that I have discussed in one of my posts, feel free to send me an e-mail at mike_stangy@msn.com. In addition, I've added a few new links on the right side of this page, so also feel free to check them out! Lastly, I would really appreciate any comments on any of my sites (here, flickr, youtube) so I can be a better writer for you and/or receive some feedback. Thanks for reading!
1 comment:
Immediately after analyze several the blog site articles on the site now, along with We really such as ones methods of writing a blog. It had been super great along with educational.
Vehicle graphics
Custom signs
Post a Comment